CAP 232 40 Size (GPMA0232)
Tech Notes

To all of you who are proud owners of the new Great Planes CAP 232 kit....Congratulations on your purchase!

Note 1: There was an error on the plans and CG drawing in the manual which could make your first flight unnecessarily challenging. The balance point shown on the plans and in the drawing on page 40 of the manual should be placed at 3 3/4" (95.2 mm) back from the leading edge as instructed in the text of the manual.

Note 2: Please note the graphic for step #8 on page 28 of the manual is incorrect. Please refer to the image below for the correct measurements and orientation of the pieces.

We apologize for any confusion this may have caused.

Note 3: If you have a question about using the CAP 232 kit parts on the discontinued Great Planes CAP 231EX MonoKote covered ARF (GPMA1230), please refer to the specific FAQ.